Bestillingsvare

Lycra & Lycra Tube

Festes på vanlig laminerte hylser med klar lim. Lycra leveres i forskjellige bredder eller som metervare.

Lycra Tube har 15cm og 20cm bredde.

Sluttresultatet er en fargerik hylse.

Eksempel Lycra

LIP
Motiv (Ice Pink)

Eksempel Lycra Tube

LIP/15
Motiv (Ice Pink)Bredde 15 eller 20cm

Bla nedover for å se andre motiver.

Du kan og bruke «Transfer paper» motiver. 

Tilleggsinformasjon

Leverandør

Limbtex

Leave a Review

*

Omtaler

Det finnes ingen omtaler for dette produktet

LIP/15 or 20LCR/15 or 20LPS/15 or 20LCBY/15 or 20
LMS/15 or 20LCB/15 or 20LG/15 or 20LUW/15 or 20
LJR/15 or 20LSB/15 or 20LBP/15 or 20LHS/15 or 20
LFS/15 or 20LD/15 or 20LIB/15 or 20LES/15 or 20
LBW/15 or 20LCG/15 or 20LBIZ/15 or 20LOD/15 or 20
LSP/15 or 20LHT/15 or 20LDB/15 or 20LFF/15 or 20
LND/15 or 20LSF/15 or 20LUJ/15 or 20LSGC/15 or 20
LSKMD/15 or 20LSKLT/15 or 20LBLK/15 or 20LRG/15 or 20
LRED/15 or 20LSMFLO/15 or 20LPTFLO/15 or 20LYFLO/15 or 20
LPFLO/15 or 20
VarenummerMotiv VarenummerMotivVarenummerMotiv
LIP/[B]Ice PinkLCR/[B]Cartoon RedLPS/[B]Pink Swirl
LCBY/[B]CloudburstLMS/[B]Magic StarsLCB/[B]Coloured Bubbles
LG/[B]GraffitiLUW/[B]Under WaterLJR/[B]Jolly Roger
LSB/[B]Snake Skin BrownLBP/[B]Bunnies PinkLHS/[B]Happy Stars
LFS/[B]Film StarLD/[B]DenimLIB/[B]Ice Blue
LES/[B]Electric BlueLBW/[B]Blue WrappingLCG/[B]Camouflage Green
LBIZ/[B]BizarreLOD/[B]Orange DropsLSP/[B]Spidey
LHT/[B]High TopsLDB/[B]Dollar BillLFF/[B]French Flag
LND/[B]Welsh DragonLSF/[B]Scottish SaltireLUJ/[B]Union Jack
LSGC/[B]St Georges CrossLSKMD/[B]Skin Medium ToneLSKLT/[B]Skin Light Tone
LBLK/[B]BlackLRG/[B]Royal BlueLRED/[B]Red
LSMFLO/[B]Smiler FluorscentLPTFLO/[B]Pink Tartan FluorscentLYFLO/[B]Yellow Fluorescent
LPFLO/[B]Pink Fluorscent

[B] ≡ Bredde 15 og 20cm

How to use Lycra and get the best results

  1. Select the correct width and pull it over your cured socket/device, trimming to length and securing both ends.
  2. Pull on a PVA bag and laminate with clear resin.

Tips

Don’t pull the Lycra down too tightly as the colours will fade and any images may distort.

Turn your PVA bag inside out to give a glossy finish if required.

Apply the Lycra over cured sockets/devices for best results.

As a rule, use white pigment on the socket that you are covering as this tends to make the Lycra look brighter.

Depending on the Lycra used, try using different coloured pigments under it.